User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Appendix C Pop-up Windows, JavaScripts and Java Permissions
NBG-418N v2 User’s Guide
176
Ope ra
Opera 10 screens are used here. Screens for other versions may vary slightly.
Allowing Pop- Ups
From Opera, click Too ls, then Pre fe renc e s. In the Ge ne ra l tab, go to Choose how you pre fe r to handle
pop- ups and select Ope n all pop- ups.
Fig ure 134 Opera: Allowing Pop-Ups
Enabling Java
From Opera, click Tools, then Pre fe renc e s. In the Adva nc e d tab, select Conte nt from the left-side menu.
Select the check boxes as shown in the following screen.