User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Appendix C Pop-up Windows, JavaScripts and Java Permissions
NBG-418N v2 User’s Guide
172
5 Click Close to return to the Privac y screen.
6 Click Apply to save this setting.
Java Sc ripts
If pages of the web configurator do not display properly in Internet Explorer, check that JavaScripts are
allowed.
1 In Internet Explorer, click Tools, Inte rne t Optio ns and then the Se c urity tab.
Fig ure 128 Internet Options: Security
2 Click the Custom Le ve l... button.
3 Scroll down to Sc ripting .
4 Under Ac tive sc ripting make sure that Ena ble is selected (the default).
5 Under Sc ripting of Ja va apple ts make sure that Ena ble is selected (the default).
6 Click OK to close the window.