User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 2 The Web Configurator
NBG-418N v2 User’s Guide
17
Fig ure 4 Login Screen
5 You should see a screen asking you to change your password (highly recommended) as shown next.
Type a new password. Click Apply to save your changes. Click Ig nore if you do not want to change the
password this time.
Fig ure 5 Change Password Screen
Note: The management session automatically times out when the time period set in the
Administra tor Inac tivity Time r field expires (default five minutes). Simply log back into
the NBG-418N v2 if this happens.
6 Select the setup type you want to use.
• Click Go to Wizard Se tup to use the Configuration Wizard for basic Internet and Wireless setup.
• Click Go to Adva nc e d Se tup to view and configure all the NBG-418N v2’s settings.
• Select a language to go to the basic Web Configurator in that language. To change to the
advanced configurator see
Chapter 22 on page 148.