User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
NBG-418N v2 User’s Guide
140
Fig ure 103 Maintenance > Logs > View Log
The following table describes the labels in this screen.
Table 62 Maintenance > Logs > View Log
LABEL DESCRIPTION
First Click First button to see the first page of the log.
Previous Click Pre vio us button to go back one page from your current log page.
Next Click Ne xt button to go to the following page from your current log page.
Last Click Last button to go to the last page of the log.
Clear Logs Click C le a r Lo g s to delete all the logs.
Time This field displays the time the log was recorded.
Index This is the index number of the log.
Type This field displays the type of the log.
Log information This field states the reason for the log.