User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
NBG-418N v2 User’s Guide
136
C HAPTER 18
Syste m
18.1 Ove rvie w
This chapter provides information on the Syste m screens.
See the chapter about wizard setup for more information on the next few screens.
18.2 Wha t You Ca n Do
• Use the Ge nera l screen to enter a name to identify the NBG-418N v2 in the network and set the
password (
Section 18.3 on page 136).
• Use the Time Se tting screen to change your NBG-418N v2’s time and date (
Section 18.4 on page 137).
18.3 Syste m Ge ne ra l Sc re e n
Use this screen to enter a name to identify the NBG-418N v2 in the network and set the password. Click
Ma inte nanc e > Syste m. The following screen displays.
Fig ure 101 Maintenance > System > General