User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
NBG-418N v2 User’s Guide
112
C HAPTER 11
Dyna mic DNS
11.1 Ove rvie w
Dynamic Domain Name Service (DDNS) services let you use a fixed domain name with a dynamic IP
address. Users can always use the same domain name instead of a different dynamic IP address that
changes each time to connect to the NBG-418N v2 or a server in your network.
Note: The NBG-418N v2 must have a public global IP address and you should have your
registered DDNS account information on hand.
11.2 Dyna mic DNS Sc re e n
To configure your NBG-418N v2’s DDNS, click Ne twork > DDNS.
Fig ure 81 Network > DDNS
The following table describes the labels in this screen.
Table 51 Network > DDNS
LABEL DESCRIPTION
Enable Dynamic
DNS
Click the Ena ble Dyna mic DNS check box to enable DDNS.
Service Provider Select the name of your DDNS Service provider from the drop-down list.
Host Name The Host name is the domain name that the DDNS service will map to your dynamic global IP
address. Type the host name fully qualified, for example, ‘yourhost.mydomain.net’. You can
specify up to two host names in the field separated by a comma (",").
User Name Type the User name that you used when you registered with the DDNS service.
Password Type the Password associated with the DDNS user name.
Apply Click Apply to save your changes back to the NBG-418N v2.
Reset Click Re se t to begin configuring this screen afresh.
Dynamic DDNS Table