User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 9 DHCP Server
NBG-418N v2 User’s Guide
101
Fig ure 72 Network > DHCP Server > Static DHCP
The following table describes the labels in this screen.
9.6 Clie nt List Sc re e n
The DHCP table shows current DHCP client information (including IP Addre ss, Host Na m e and MAC
Addre ss) of network clients using the NBG-418N v2’s DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click Ne twork
> DHC P Se rve r > Clie nt List.
Note: You can also view a read-only client list by clicking the DHCP Table (De ta ils...) hyperlink
in the Sta tus screen.
The following screen displays.
Table 45 Network > DHCP Server > Static DHCP
LABEL DESCRIPTION
Static DHCP Table
IP Address Type the LAN IP address of a computer on your LAN.
MAC Address Type the MAC address of a computer on your LAN.
Add Click Add button to add a new static DHCP entry.
Update Click Upda te button to modify the selected entry’s settings.
Delete Click De le te button to delete the selected static DHCP entry.
Reset Click Re se t to clear the IP Address and MAC address box fields.
DHCP Static IP Table
Select Click the Sele c t radio button to select a static DHCP entry.
IP Address This field displays the LAN IP address of a computer on your LAN.
MAC Address This field displays the MAC address of a computer on your LAN.