Operation Manual

NBG318S User’s Guide

CHAPTER 6

Tutorial

This chapter gives you examples of how to set up a wireless access point and a wireless client

for wireless communication using some example settings.

SSID SSID_Example3

Channel 6

Security WPA-PSK

(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)

802.11 mode IEEE 802.11b/g

6.1 Example Parameters

An access point (AP) or wireless router is referred to as an “AP” and a computer with a

wireless network card or USB/PCI adapter is referred to as a “wireless client” here.

We use the M-302 utility screens as an example for the wireless client. The screens may vary

for different models.

6.2 Configuring the AP

Flow the steps below to configure the wireless settings on your AP.

3 Open the Wireless LAN > General screen in the AP’s web configurator.