Operation Manual

Chapter 1 Getting to Know Your NBG318S
NBG318S User’s Guide
34
The following table describes the NBG318S v2’s LEDs.
HomePlug Green On The NBG318S has a successful HomePlug AV
connection.
Blinking The NBG318S is sending/receiving data.
Off The HomePlug AV connection is not ready, or failed.
WAN Green On The NBG318S has a successful WAN connection.
Blinking The NBG318S is sending/receiving data.
None Off The WAN connection is not ready, or has failed.
LAN 1-3 Green On The NBG318S has a successful Ethernet connection.
Blinking The NBG318S is sending/receiving data.
Off The LAN is not connected.
WLAN Green On The NBG318S is ready, but is not sending/receiving
data through the wireless LAN.
Blinking The NBG318S is sending/receiving data through the
wireless LAN.
None Off The wireless LAN is not ready or has failed.
WPS Green On WPS (WiFi Protected Setup) is configured on your
device.
Note: Upgrade your firmware to install the
WPS feature on your device.
Blinking The NBG318S is attempting to connect with another
wireless devices using WPS.
Off WPS is disabled on your device.
Table 1 NBG318S Front Panel LEDs (continued)
LED ICON COLOR STATUS DESCRIPTION
Table 2 NBG318S v2 Front Panel LEDs
LED ICON COLOR STATUS DESCRIPTION
Power Green On The NBG318S v2 is receiving power and functioning
properly.
Off The NBG318S v2 is not receiving power.