Operation Manual

NBG318S User’s Guide
223
CHAPTER 24
Sys Op Mode
24.1 Selecting System Operation Mode
Use this screen to select how you connect to the Internet.
Figure 130 Maintenance > Sys OP Mode > General
The figure below shows devices connecting to the Internet through a DSL connection. Select
Router(Ethernet WAN) in the screen if you connect to the Internet as shown in diagram.
Figure 131 System Operation Mode: Ethernet WAN
The figure below shows the NBG318S connecting to the Internet as an access point. Select
Access Point in the screen if you connect to the Internet as shown in the diagram.