Operation Manual

Chapter 20 System
NBG318S User’s Guide
198
20.3 Time Setting Screen
To change your NBG318S’s time and date, click Maintenance > System > Time Setting. The
screen appears as shown. Use this screen to configure the NBG318S’s time based on your
local time zone.
Figure 117 Maintenance > System > Time Setting
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long it
has been left idle (not recommended).
Password Setup Change your NBG318S’s password (recommended) using the fields as shown.
Old Password Type the default password or the existing password you use to access the
system in this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the NBG318S.
Reset Click Reset to begin configuring this screen afresh.
Table 75 Maintenance > System > General
LABEL DESCRIPTION