Operation Manual

Chapter 19 Universal Plug-and-Play (UPnP)
NBG318S User’s Guide
185
19.4 Installing UPnP in Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
19.4.0.1 Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
1 Click Start and Control Panel. Double-click Add/Remove Programs.
2 Click on the Windows Setup tab and select Communication in the Components
selection box. Click Details.
Figure 102 Add/Remove Programs: Windows Setup: Communication
3 In the Communications window, select the Universal Plug and Play check box in the
Components selection box.
Apply Click Apply to save the setting to the NBG318S.
Cancel Click Cancel to return to the previously saved settings.
Table 74 Management > UPnP > General
LABEL DESCRIPTION