User Manual

Table Of Contents

LTE3301 Series User’s Guide

C HAPTER 12

Ro uting

12.1 O ve rvie w

This chapter shows you how to configure static routes for your LTE3301.

The LTE3301 usually uses the default gateway to route outbound traffic from computers on the LAN to

the Internet. To have the LTE3301 send data to devices not reachable through the default gateway, use

static routes.

For example, the next figure shows a computer (A ) connected to the LTE3301’s LAN interface. The

LTE3301 routes most traffic from A to the Internet through the LTE3301’s default gateway (R1). You create

one static route to connect to services offered by your ISP behind router R2. You create another static

route to communicate with a separate network behind a router R3 connected to the LAN.

Fig ure 63 Example of Static Routing Topology

12.2 Sta tic Ro ute Sc re e n

Click Ne two rk > Ro uting > Sta tic Ro ute to open the Sta tic Route screen.

WAN

LAN