User Manual

Chapter 9 DHCP Server
LTE3301 Series User’s Guide
86
9.4 DHC P C lie nt List Sc re e n
The DHCP table shows current DHCP client information (including IP Address, Host Name and MAC
Address) of network clients using the LTE3301’s DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click Ne two rk
> DHC P Se rve r > C lie nt List.
Note: You can also view a read-only client list by clicking Mo nito r > DHCP Se rve r.
Fig ure 53 Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 35 Network > DHCP Server > Client List
LABEL DESC RIPTIO N
# This is the index number of the host computer.
Status This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the computer with the name in the Ho st Na m e field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Apply Click App ly to save your changes back to the LTE3301.
Cancel Click C a nc e l to reload the previous configuration for this screen.