User Manual
Table Of Contents
- LTE3301 Series
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Routing
- Interface Group
- Firewall
- Content Filtering
- IPv6 Firewall
- Bandwidth Management
- Universal Plug-and-Play (UPnP)
- TR-069
- Maintenance
- Troubleshooting
- Pop-up Windows, JavaScript and Java Permissions
- Setting Up Your Computer’s IP Address
- Common Services
- Customer Support
- Legal Information
- Index
Chapter 8 LAN
LTE3301 Series User’s Guide
81
Fig ure 49 LAN and WAN IP Addresses
The LAN parameters of the LTE3301 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS server
address(es), read the embedded Web Configurator help regarding what fields need to be configured.
8.4 LAN IP Sc re e n
Use this screen to change the IP address for your LTE3301. Click Ne two rk > LAN > IP.
Fig ure 50 Network > LAN > IP
The following table describes the labels in this screen.
Table 32 Network > LAN > IP
LABEL DESC RIPTION
IP Address Type the IP address of your LTE3301 in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your LTE3301 will
automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the LTE3301.
Apply Click Apply to save your changes back to the LTE3301.
Cancel Click Ca nc e l to begin configuring this screen afresh.