User Manual

Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
77
7.9 WPS Sta tio n Sc re e n
Use this screen when you want to add a wireless station using WPS. To open this screen, click Ne two rk >
Wire le ss LAN > WPS Sta tio n tab.
Note: After you click Push Butto n on this screen, you have to press a similar button in the
wireless station utility within 2 minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station again after the first 2
minutes.
Fig ure 45 Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
7.10 Sc he duling Sc re e n
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled
by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To
open this screen, click Ne two rk > Wire le ss LAN > Sc he d uling tab.
Table 29 Network > Wireless LAN > WPS Station
LABEL DESC RIPTIO N
Push Button Use this button when you use the PBC (Push Button Configuration) method to configure
wireless station’s wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Or input station’s PIN
number
Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings.
Type the same PIN number generated in the wireless station’s utility. Then click Sta rt to
associate to each other and perform the wireless security information synchronization.