User Manual

Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
75
7.7 Q ua lity o f Se rvic e (Q o S) Sc re e n
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Ne two rk > Wire le ss LAN > Q o S. The following screen appears.
Fig ure 43 Network > Wireless LAN > QoS
The following table describes the labels in this screen.
7.8 WPS Sc re e n
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Ne two rk > Wire le ss LA N > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on
the LTE3301.
Table 27 Network > Wireless LAN > QoS
LABEL DESC RIPTIO N
WMM QoS Select Ena b le to have the LTE3301 automatically give a service a priority level according
to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of
Service) gives high priority to voice and video, which makes them run more smoothly.
This field is not configurable and the LTE3301 automatically enables WMM QoS if you
select 802.11n, 802.11g n or 802.11b g n in the Wire le ss LA N > G e ne ra l screen.
Apply Click App ly to save your changes to the LTE3301.
Cancel Click Ca nc e l to reload the previous configuration for this screen.