User Manual

Chapter 7 Wireless LAN
LTE3301 Series User’s Guide
67
Fig ure 36 Network > Wireless LAN > General: Static WEP
The following table describes the wireless LAN security labels in this screen.
Table 20 Network > Wireless LAN > General: Static WEP
LABEL DESC RIPTIO N
Security Mode Select Sta tic WEP to enable data encryption.
WEP Encryption Select 64- b its or 128- b its.
This dictates the length of the security key that the network is going to use.
Authentication
Method
Select Auto or Sha re d Ke y from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP key to log into the
wireless network. Keep this setting at Auto unless you want to force a key verification before
communication between the wireless client and the LTE3301 occurs.
Select Sha re d Ke y to force the clients to provide the WEP key prior to communication.
ASCII Select this option in order to enter ASCII characters as WEP key.
Hex Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.