User Manual

Chapter 6 WAN
LTE3301 Series User’s Guide
54
The following table describes the labels in this screen.
Table 14 Network > WAN > Management WAN Edit
LABEL DESC RIPTIO N
ISP Parameters for Internet Access
Encapsulation This shows the WAN connection type.
3G/4G Information
Dial-Up Profile Select Auto - De te c tio n to have the LTE3301 use the inserted SIM card’s default settings to
connect to any available mobile network.
Select Ma nua l and enter the information provided by your service provider to connect to
the service provider’s mobile network.
Country Select the country in which you use the LTE3301.
Service Provider Select the name of your service provider. The options vary depending on the country you
selected.
If your service provider is not in the list, select O the rs.
APN Connections with different APNs (Access Point Names) may provide different services
(such as Internet access or MMS (Multi-Media Messaging Service)) and charge method.
The corresponding APN automatically displays when you select a pre-defined service
provider.
If you select O the rs in the Se rvic e Provide r field, manually enter the APN provided by your
service provider. You can enter up to 32 ASCII printable characters. Spaces are allowed.
PIN Code A PIN (Personal Identification Number) code is a key to a SIM card. Without the PIN code,
you cannot use the SIM card.
If your service provider enabled PIN code authentication, enter the 4-digit PIN code
(0000 for example) provided by your service provider. If you enter the PIN code
incorrectly, the SIM card may be blocked by your service provider and you cannot use
the account to access the Internet.
If your service provider disabled PIN code authentication, leave this field blank.
Dialed Number This is the phone number (dial string) used to dial up a connection to your service
provider’s base station. Your service provider should provide the phone number. For
example, *99# is the dial string to establish a GPRS or 3G/4G connection in Taiwan.
The corresponding phone number automatically displays when you select a pre-defined
service provider.
If you select Othe rs in the Se rvic e Pro vide r field, manually enter the phone number
provided by your service provider.
Account Type the user name (of up to 64 ASCII printable characters) given to you by your service
provider.
Password Type the password (of up to 64 ASCII printable characters) associated with the user
name above.
Authentication The LTE3301 supports PAP (Password Authentication Protocol) and CHAP (Challenge
Handshake Authentication Protocol). CHAP is more secure than PAP; however, PAP is
readily available on more platforms
Select an authentication protocol (PAP, or C HAP) used by the service provider.
Otherwise, select A uto to have the LTE3301 accept either CHAP or PAP.
Primary DNS Enter the first DNS server address assigned by the service provider.
Secondary DNS Enter the second DNS server address assigned by the service provider.
Roaming 3G/4G roaming is to use your mobile device in an area which is not covered by your
service provider. Enable roaming to ensure that your LTE3301 is kept connected to the
Internet when you are traveling outside the geographical coverage area of the network
to which you are registered.