User Manual

Chapter 5 Monitor
LTE3301 Series User’s Guide
44
Click Mo nito r > DHC P Ta b le or C o nfig ura tio n > Ne two rk > DHC P Se rve r > C lie nt List. Read-only information
here relates to your DHCP status. The DHCP table shows current DHCP client information (including MAC
Addre ss, and IP Addre ss) of all network clients using the LTE3301’s DHCP server.
Fig ure 22 Monitor > DHCP Table
The following table describes the labels in this screen.
5.5 Pa c ke t Sta tistic s
Click Mo nito r > Pa c ke t Sta tistic s or the Pa c ke t Sta tistic s (De ta ils...) hyperlink in the Sta tus screen. Read-
only information here includes port status, packet specific statistics and the "system up time". The Po ll
Inte rva l(s) field is configurable and is used for refreshing the screen.
Table 9 Monitor > DHCP Table
LABEL DESC RIPTIO N
# This is the index number of the host computer.
Status This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
Host Name This field displays the computer host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the computer with the name in the Ho st Na m e field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Apply Click Ap ply to save your changes back to the LTE3301.
Cancel Click C a nc e l to reload the previous configuration for this screen.