User Manual
Table Of Contents
- LTE3301 Series
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Routing
- Interface Group
- Firewall
- Content Filtering
- IPv6 Firewall
- Bandwidth Management
- Universal Plug-and-Play (UPnP)
- TR-069
- Maintenance
- Troubleshooting
- Pop-up Windows, JavaScript and Java Permissions
- Setting Up Your Computer’s IP Address
- Common Services
- Customer Support
- Legal Information
- Index
Chapter 4 Tutorials
LTE3301 Series User’s Guide
33
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 2.2 on page 16).
1 Make sure the WIFI switch (at the back panel of the LTE3301) is set to O N.
2 Open the C o nfig ura tio n > Ne two rk > Wire le ss LAN > G e ne ra l screen in the AP’s Web Configurator.
3 Confirm that the wireless LAN is enabled on the LTE3301.
4 Enter SSID_Exa m ple 3 as the SSID and select C ha nne l- 06 as the channel. Set security mode to WPA2- PSK
and enter Thisism yWPA- PSKp re - sha re dke y in the Pre - Sha re d Ke y field. Click Apply.