User Manual

Chapter 18 Universal Plug-and-Play (UPnP)
LTE3301 Series User’s Guide
118
When a UPnP device joins a network, it announces its presence with a multicast message. For security
reasons, the LTE3301 allows multicast messages on the LAN only.
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
18.3 UPnP Sc re e n
Use this screen to enable UPnP on your LTE3301.
Click Ma na g e m e nt > UPnP to display the screen shown next.
Fig ure 78 Management > UPnP
The following table describes the fields in this screen.
18.4 Te c hnic a l Re fe re nc e
The sections show examples of using UPnP.
18.4.1 Using UPnP in Windo ws XP Exa m ple
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP installed
in Windows XP and UPnP activated on the LTE3301.
Make sure the computer is connected to a LAN port of the LTE3301. Turn on your computer and the
LTE3301.
18.4.1.1 Auto - disc o ve r Yo ur UPnP- e na ble d Ne two rk De vic e
1 Click sta rt and C o ntro l Pa ne l. Double-click Ne two rk C o nne c tio ns. An icon displays under Internet
Gateway.
2 Right-click the icon and select Prope rtie s.
Table 54 Management > UPnP
LABEL DESC RIPTIO N
UPnP Select Ena b le to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the LTE3301's IP address (although
you must still enter the password to access the web configurator).
Apply Click App ly to save the setting to the LTE3301.
Cancel Click C a nc e l to return to the previously saved settings.