User Manual
Table Of Contents
- LTE3301 Series
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Routing
- Interface Group
- Firewall
- Content Filtering
- IPv6 Firewall
- Bandwidth Management
- Universal Plug-and-Play (UPnP)
- TR-069
- Maintenance
- Troubleshooting
- Pop-up Windows, JavaScript and Java Permissions
- Setting Up Your Computer’s IP Address
- Common Services
- Customer Support
- Legal Information
- Index
Chapter 16 IPv6 Firewall
LTE3301 Series User’s Guide
112
Dest IP Address Enter the IPv6 address of the computer to which traffic for the application or service is
entering.
The LTE3301 applies the firewall rule to traffic destined for this computer.
Source IP Address Enter the IPv6 address of the computer that initializes traffic for the application or service.
The LTE3301 applies the firewall rule to traffic initiating from this computer.
Protocol Select the protocol (TC P, UDP or IC MP) used to transport the packets for which you want to
apply the firewall rule.
Dest Port Range Enter the port number/range of the destination that defines the traffic type, for example
TCP port 80 defines web traffic.
Source Port Range Enter the port number/range of the source that defines the traffic type, for example TCP
port 80 defines web traffic.
Add Rule Click Add Rule to save the firewall rule.
Firewall Rule
# This is your firewall rule number. The ordering of your rules is important as rules are applied in
turn.
ServiceName This is a name that identifies or describes the firewall rule.
MACaddress This is the MAC address of the computer for which the firewall rule applies.
DestIP This is the IP address of the computer to which traffic for the application or service is
entering.
SourceIP This is the IP address of the computer to which traffic for the application or service is
initialized.
Protocol This is the protocol (TC P, UDP or IC MP) used to transport the packets for which you want to
apply the firewall rule.
DestPortRange This is the port number/range of the destination that defines the traffic type, for example
TCP port 80 defines web traffic.
SourcePortRange This is the port number/range of the source that defines the traffic type, for example TCP
port 80 defines web traffic.
Action DRO P - Traffic matching the conditions of the firewall rule is stopped.
Delete Click De le te to remove the firewall rule.
Cancel Click Ca nc e l to restore your previously saved settings.
Table 50 Configuration > Security > IPv6 Firewall (continued)
LABEL DESC RIPTIO N