User's Manual

Chapter 8 AP Management

NXC CLI Reference Guide

8.2.1 AP Management Commands Example

The following example shows you how to add an AP to the management list, and then edit it.

Router# show capwap ap wait-list

index: 1

IP: 192.168.1.35, MAC: 00:11:11:11:11:FE

Model: NWA5160N, Description: AP-00:11:11:11:11:FE

index: 2

IP: 192.168.1.36, MAC: 00:19:CB:00:BB:03

Model: NWA5160N, Description: AP-00:19:CB:00:BB:03

Router# configure terminal

Router(config)# capwap ap add 00:19:CB:00:BB:03

Router(config)# capwap ap 00:19:CB:00:BB:03

Router(AP 00:19:CB:00:BB:03)# slot1 ap-profile approf01

Router(AP 00:19:CB:00:BB:03)# exit

Router(config)# show capwap ap all

index: 1

Status: RUN

IP: 192.168.1.37, MAC: 40:4A:03:05:82:1E

Description: AP-404A0305821E

Model: NWA5160N

R1 mode: AP, R1Prof: default

R2 mode: AP, R2Prof: n/a

Station: 0, RadioNum: 2

Mgnt. VLAN ID: 1, Tag: no

WTP VLAN ID: 1, WTP Tag: no

Force VLAN: disable

Firmware Version: 2.25(AAS.0)b2

Recent On-line Time: 08:43:04 2012/07/24

Last Off-line Time: N/A

Router(config)# show capwap ap 40:4A:03:05:82:1E slot1 detail

index: 1

SSID: ZyXEL, BSSID: 40:4A:03:05:82:1F

SecMode: NONE, Forward Mode: Local Bridge, Vlan: 1

Router(config)# show capwap ap all statistics

index: 1

Status: RUN, Loading: -

AP MAC: 40:4A:03:05:82:1E

Radio: 1, OP Mode: AP

Profile: default, MAC: 40:4A:03:05:82:1F

Description: AP-404A0305821E

Model: NWA5160N

Band: 2.4GHz, Channel: 6

Station: 0

RxPkt: 4463, TxPkt: 38848

RxFCS: 1083323, TxRetry: 198478