User's Manual

Chapter 8 AP Management
NXC CLI Reference Guide
75
slot_name monitor-profile
profile_name
Sets the specified radio (slot_name) to monitor mode
and assigns a created profile to the radio. Monitor mode
APs act as wireless monitors, which can detect rogue
APs and help you in building a list of friendly ones. See
also Section 9.2 on page 77.
no slot_name monitor-profile Removes the monitor mode profile assignment for the
specified radio (slot_name).
description ap_description Sets the description for the specified AP.
[no] force vlan Sets whether or not the NXC changes the AP’s
management VLAN to match the one you configure using
the vlan sub-command. The management VLAN on the
NXC and AP must match for the NXC to manage the AP.
This takes priority over the AP’s CAPWAP client
commands described in Chapter 43 on page 271.
vlan <1..4094> {tag | untag} Sets the VLAN ID for the specified AP as well as whether
packets sent to and from that ID are tagged or untagged.
exit Exits the sub-command mode for the specified AP.
show capwap ap wait-list Displays a list of connected but as-of-yet unmanaged
APs. This is known as the ‘wait list’.
show capwap ap {all | ap_mac} Displays the management list (all) or whether the
specified AP is on the management list (ap_mac).
show capwap ap all statistics Displays radio statistics for all APs on the management
list.
show capwap ap ap_mac slot_name detail Displays details for the specified radio (slot_name) on
the specified AP (ap_mac).
show capwap ap {all | ap_mac} config
status
Displays whether or not any AP’s configuration or the
specified AP’s configuration is in conflict with the NXC’s
settings for the AP and displays the settings in conflict if
there are any.
show capwap station all Displays information for all stations connected to the APs
on the management list.
capwap station kick sta_mac Forcibly disconnects the specified station from the
network.
Table 29 Command Summary: AP Management (continued)
COMMAND DESCRIPTION