User's Manual

Chapter 36 Logs
NXC CLI Reference Guide
247
show wtp-logging status mail [ap_mac] Displays the logging status for the specified AP’s
mail log.
show wtp-logging query-log ap_mac Displays the specified AP’s query log.
show wtp-logging query-dbg-log ap_mac Displays the specified AP’s query debug log.
show wtp-logging result-status Displays the AP logging result status.
show wtp-logging dbg-result-status Displays the AP logging debug result status.
[no] wtp-logging syslog syslog_range category
module_name disable
Disables the logging of the specified syslog
category.
[no] wtp-logging syslog syslog_range category
module_name level {normal | all}
Enables logging of the specified syslog category
and specifies the logging level.
[no] wtp-logging mail mail_range category
module_name level {alert | all}
Enables mail logging on APs for the specified
category.
[no] wtp-logging system-log category
module_name level {normal | all }
Enables system logging on the APs for the
specified category.
[no] wtp-logging system-log category
module_name disable
Disables system logging on the APs for the
specified category.
[no] wtp-logging system-log suppression Enables log consolidation in the system log on the
APs. The
no command disables log consolidation
in the debug log.
[no] wtp-logging system-log suppression
interval <10..600>
Sets the log consolidation interval for the system
log on the APs. The
no command sets the interval
to ten.
[no] wtp-logging debug suppression Enables debug logging suppression. Use the no
parameter to disable.
[no] wtp-logging debug suppression interval
<10..600>
Enables debug logging suppression during the
specified interval. Use the no parameter to disable.
[no] wtp-logging console Enables logging of console activity. Use the no
parameter to disable.
[no] wtp-logging console category module_name
level pri
Enables logging of the specified category at the
specified priority level.
Table 144 logging Commands: Access Point Settings (continued)
COMMAND DESCRIPTION