User's Manual

Chapter 33 System
NXC CLI Reference Guide
209
33.3 Host Name Commands
The following table describes the commands available for the hostname and domain name.
You must use the
configure terminal command to enter the configuration mode before
you can use these commands.
33.4 Time and Date
For effective scheduling and logging, the NXC system time must be accurate. The NXC’s Real
Time Chip (RTC) keeps track of the time and date. There is also a software mechanism to set
the time manually or get the current time and date from an external server.
login-page title title Sets the title for the top of the login screen. Use up to 64
printable ASCII characters. Spaces are allowed.
login-page title-color {color-rgb |
color-name | color-number}
Sets the title text color of the login page.
logo background-color {color-rgb |
color-name | color-number}
Sets the color of the logo banner across the top of the login
screen and access page.
show access-page settings Lists the current access page settings.
show login-page default-title Lists the factory default title for the login page.
show login-page settings Lists the current login page settings.
show logo settings Lists the current logo background (banner) and floor (line below
the banner) settings.
show page-customization Lists whether the NXC is set to use custom login and access
pages or the default ones.
Table 119 Command Summary: Customization (continued)
COMMAND DESCRIPTION
Table 120 Command Summary: Host Name
COMMAND DESCRIPTION
[no] domainname <domain_name> Sets the domain name. The
no command removes the domain
name.
domain_name: This name can be up to 254 alphanumeric
characters long. Spaces are not allowed, but dashes “-” and
underscores “_” are accepted.
[no] hostname <hostname> Sets a descriptive name to identify your NXC. The
no command
removes the host name.
show fqdn Displays the fully qualified domain name.