User's Manual

Chapter 20 Application Patrol
NXC CLI Reference Guide
133
20.2.6 General Commands for Application Patrol
 You must register for the IDP/AppPatrol signature service (at least the trial)
before you can use it. See Chapter 5 on page 41.
This table lists the general commands for application patrol.
[no] inbound-dscp-mark {<0..63> | class
{default | dscp_class}}
This is how the NXC handles the DSCP value of
the outgoing packets to a connection’s initiator that
match this policy.
Enter a DSCP value to have the NXC apply that
DSCP value. Set this to the class default to have
the NXC set the DSCP value to 0.
[no] log [alert] Creates log entries (and alerts) for traffic that
matches the rule. The
no command does not
create any log entries.
[no] outbound-dscp-mark {<0..63> | class
{default | dscp_class}}
This is how the NXC handles the DSCP value of
the outgoing packets from a connection’s initiator
that match this policy.
Enter a DSCP value to have the NXC apply that
DSCP value. Set this to the class default to have
the NXC set the DSCP value to 0.
show Displays the rule’s configuration
Table 69 app patrol other rule Sub-commands (continued)
COMMAND DESCRIPTION
Table 70 app Commands: Pre-Defined Applications
COMMAND DESCRIPTION
[no] app activate Turns on application patrol. The no command
turns off application patrol.
[no] app highest sip bandwidth priority Turns the option to maximize the throughput of SIP
traffic on or off.
[no] app protocol_name bandwidth-graph Sets the specified protocol to display on the
bandwidth statistics graph. The
no command has it
not display on the bandwidth statistics graph.
[no] app other protocol_name bandwidth-graph Sets traffic for unidentified applications to display
on the bandwidth statistics graph. The
no
command it not display on the bandwidth statistics
graph.
[no] bwm activate Globally enables bandwidth management. You
must globally activate bandwidth management to
have individual policy routes or application patrol
policies apply bandwidth management. The
no
command globally disables bandwidth
management.
show app config Displays whether or not application patrol is active.
show app all Displays the settings for all applications.