User's Manual

Chapter 3 The Web Configurator
NBG-510S User’s Guide
37
3.4 Login Timeout
By default, the web configurator automatically logs you out after 5 minutes (300 seconds) of
inactivity. When this happens, a warning screen displays and you will be redirected to the
login screen. Simply log into the web configurator again to continue your management tasks.
Figure 11 Timeout Message
3.4.1 Changing Login Timeout
To change the default login timeout period click Maintenance > General to display the
following screen. In the Administrator Inactivity Timer field, specify a time (in minutes).
Click Apply to save the changes. A value of "0" means a management session never times out,
no matter how long it has been left idle (not recommended).
You can also use this screen to change the administrator login password (refer to Section 3.5
on page 37).
Figure 12 Maintenance: Password
3.5 Changing Password
It is highly recommended that you change the default administrator login password in the
Change Password screen after the first successful login. Click Maintenance > General to
display the configuration screen (see Figure 12 on page 37).