User's Manual

NBG-510S User’s Guide
29
CHAPTER 2
Hardware Connection
This chapter describes the port connections and LEDs.
2.1 Ports and Connectors
This section describes the ports and connectors on the ZyXEL Device. Refer to the Quick Start
Guide for information on connecting the ZyXEL Device for initial setup and basic
configuration.
Figure 3 Rear Panel
The following table describes the port connections.
Table 1 Rear Panel
LABEL DESCRIPTION
POWER Use the included power adaptor to connect the POWER socket to an appropriate
power source. See Appendix A on page 171 for the power adaptor’s
specifications.
RESET Use this button to reset the ZyXEL Device to the factory default settings. See Section
3.6 on page 38 for details.
LAN 1~4 Use Ethernet cables to connect these 10/100 Mbps Ethernet ports to computers,
servers or Ethernet devices on your network.
WAN Use an Ethernet cable to connect this Ethernet port to a broadband modem or router.