Manualshelf

User's Manual

ManualsBrandsZyXEL ManualsNetwork RouterZyXEL 802.11g Wireless Remote Access Broadband Gateway NBG-510S
161162163164165166167168169170
Chapter 26 Troubleshooting
NBG-510S User’s Guide
169
To reset the ZyXEL Device,
1 Make sure the PWR LED is on and not blinking.
2 Use a pointed object to press the RESET button in for five seconds and release it.
If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting,
and log in to the web configurator. The LAN IP address is 192.168.1.1. The user name is
“admin”. The password is “1234”.
If the ZyXEL Device does not restart automatically,
disconnect and reconnect the ZyXEL
Device’s power. Then, follow the directions above again.