User's Manual

Chapter 16 Static Route
NBG-510S User’s Guide
114
Figure 74 Management > Static Route
The following table describes the labels in this screen.
16.2.1 IP Static Route Edit
Click a static route’s Edit icon to display the following screen. Use this screen to configure the
required information for a static route.
Figure 75 Management > Static Route > Edit
Table 32 Management > Static Route
LABEL DESCRIPTION
# This is the number of an individual static route.
Name This is the name that describes or identifies this route.
Active This field shows whether this static route is active (Yes) or not (No).
Destination This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the ZyXEL Device’s interface. The gateway helps forward
packets to their destinations.
Action Click the Edit icon to go to the screen where you can set up a static route on the
ZyXEL Device. No matter which edit icon you click, the entry is added in the first
available row.
Click the Delete icon to remove a static route from the ZyXEL Device. A window
displays asking you to confirm that you want to delete the route.