Switch - Ethernet Switch User Manual

ES-2108 Series User’s Guide
172 Chapter 28 Command Examples
28.2.2 show ip
Syntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all
switch interfaces.
The following figure shows the default interface settings.
Figure 102 show ip Command Example
28.2.3 show logging
Note: This command is not available in User mode.
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
ras> show ip
IP Interface
IP[192.168.1.1], Netmask[255.255.255.0], VID[1]
ras>