User`s guide

ZyWALL 2 Plus User’s Guide
Chapter 22 Maintenance 353
Figure 185 Password Setup
The following table describes the labels in this screen.
22.4 Time and Date
There is a software mechanism to set the time manually or get the current time and date from
an external server when you turn on your ZyWALL.
To change your ZyWALL’s time and date, click MAINTENANCE > Time and Date. The
screen appears as shown. Use this screen to configure the ZyWALL’s time based on your local
time zone.
Table 126 Password Setup
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system
in this field.
New Password Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type.
Retype to Confirm Type the new password again for confirmation.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.