ZyWALL User's Guide

Chapter 15 Certificates
ZyWALL 2 Plus User’s Guide
322
Server Port This field displays the default server port number of the protocol that you select in
the Access Protocol field.
You may change the server port number if needed, however you must use the
same server port number that the directory server uses.
389 is the default server port number for LDAP.
Login Setting
Login The ZyWALL may need to authenticate itself in order to assess the directory
server. Type the login name (up to 31 ASCII characters) from the entity
maintaining the directory server (usually a certification authority).
Password Type the password (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).
Apply Click Apply to save your changes back to the ZyWALL.
Cancel Click Cancel to quit configuring this screen and return to the Directory Servers
screen.
A. At the time of writing, LDAP is the only choice of directory server access protocol.
Table 90 SECURITY > CERTIFICATES > Directory Server > Add
LABEL DESCRIPTION