ZyWALL User's Guide

Chapter 6 LAN Screens
ZyWALL 2 Plus User’s Guide
139
6.8 LAN Static DHCP
This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
To change your ZyWALL’s static DHCP settings, click NETWORK > LAN > Static DHCP.
The screen appears as shown.
Figure 93 NETWORK > LAN > Static DHCP