Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
System Screens 4-5
Table 4-2 DDNS
LABEL DESCRIPTION
User Name Type your user name.
Password Type the password assigned to you.
Enable Wildcard
Option
Your ZyAIR supports DYNDNS wildcard. Select the check box to enable.
Enable off line option
This option is available when CustomDNS is selected in the DDNS Type field.
Check with your dynamic DNS service provider to have traffic redirected to a URL
(that you can specify) while you are off line.
IP Address Update Policy:
Use WAN IP address Select this option to update the IP address of the host name(s) to the WAN IP
address.
DDNS server auto
detect IP Address
Select this option to update the IP address of the host name(s) automatically by
the DDNS server. It is recommended that you select this option.
Use specified IP
Address
Select this option to update the IP address of the host name(s) to the IP address
specified below. Use this option if you have a static IP address.
IP Addr
Enter the IP address if you select the Use specified IP Address option.
Apply
Click Apply to save your changes back to the ZyAIR.
Reset
Click Reset to reload the previous configuration for this screen.
4.5 Configuring Password
To change your ZyAIR’s password (recommended), click ADVANCED, SYSTEM and then the Password
tab. The screen appears as shown. This screen allows you to change the ZyAIR’s password.
If you forget your password (or the ZyAIR IP address), you will need to reset the ZyAIR or upload the
default configuration file via console port (on ZyAIR B-2000 only). See the Resetting the ZyAIR section for
details.