Wireless Gateway Series User's Guide

ZyAIR Wireless Gateway Series User’s Guide
System Maintenance and SMT Menu 24.8 to 24.10 29-5
Figure 29-6 Menu 24.10 System Maintenance : Time and Date Setting
The following table describes the fields in this menu.
Table 29-3 Menu 24.10 System Maintenance : Time and Date Setting
FIELD DESCRIPTION
Time Protocol Enter the time service protocol that your time server sends when you turn on the
ZyAIR. Not all time servers support all protocols, so you may have to check with
your ISP/network administrator or use trial and error to find a protocol that works.
The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None. The default, enter the time manually.
Time Server
Address
Enter the IP address or domain name of your time server. Check with your
ISP/network administrator if you are unsure of this information.
Current Time This field displays an updated time only when you reenter this menu.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server.
When you select None in the Time Protocol field, enter the new time in hour,
minute and second format.
Menu 24.10 - System Maintenance - Time and Date Setting
Time Protocol= None
Time Server Address= N/A
Current Time: 00 : 12 : 30
New Time (hh:mm:ss): 00 : 12 : 22
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2000 - 01 - 01
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd): 01 - 01
End Date (mm-dd): 01 - 01
Press ENTER to Confirm or ESC to Cancel: