P-2302R Series VoIP Station Gateway User's Guide

P-2302R Series User’s Guide
Chapter 11 Phone Usage 126
CHAPTER 11
Phone Usage
This chapter describes how to use a phone connected to your Prestige for basic tasks.
11.1 Dialing a Telephone Number
The VoI P/PWR LED turns orange when your SIP account is registered. Dial a SIP number
like “12345” on your phone’s keypad.
Use speed dial entries (see Section 10.2 on page 120) for peer-to-peer calls or SIP numbers
that use letters. Dial the speed dial entry on your telephone’s keypad.
Use your voice service provider’s dialing plan to call regular telephone numbers.
11.2 Using Speed Dial to Dial a Telephone Number
After configuring the speed dial entry and adding it to the phone book, press the speed dial
entry’s key combination on your phone’s keypad.
11.3 Internal Calls
Press “####” on your phone’s keypad to call the Prestige’s other phone port.
11.4 Checking the Prestige’s IP Address
Do the following to listen to the Prestige’s IP current address.
1 Pick up your phone’s receiver.
2 Press “****” on your phone’s keypad and wait for the message that says you are in the
configuration menu.
3 Press “5” followed by the # key.
4 Listen to the IP address and make a note of it.
5 Hang up the receiver.