User`s guide

VMG8924-B10A and VMG8924-B30A Series User’s Guide 73
CHAPTER 6
Wireless
6.1 Overview
This chapter describes the Device’s Network Setting > Wireless screens. Use these screens to
set up your Device’s wireless connection.
6.1.1 What You Can Do in this Chapter
This section describes the Device’s Wireless screens. Use these screens to set up your Device’s
wireless connection.
•Use the General screen to enable the Wireless LAN, enter the SSID and select the wireless
security mode (Section 6.2 on page 74).
•Use the More AP screen to set up multiple wireless networks on your Device (Section 6.3 on
page 82).
•Use the MAC Authentication screen to allow or deny wireless clients based on their MAC
addresses from connecting to the Device (Section 6.4 on page 86).
•Use the WPS screen to enable or disable WPS, view or generate a security PIN (Personal
Identification Number) (Section 6.5 on page 87).
•Use the WMM screen to enable Wi-Fi MultiMedia (WMM) to ensure quality of service in wireless
networks for multimedia applications (Section 6.6 on page 88).
•Use the WDS screen to set up a Wireless Distribution System, in which the Device acts as a
bridge with other ZyXEL access points (Section 6.7 on page 89).
•Use the Others screen to configure wireless advanced features, such as the RTS/CTS Threshold
(Section 6.8 on page 91).
•Use the Channel Status screen to scan wireless LAN channel noises and view the results
(Section 6.9 on page 93).