User`s guide
Table Of Contents
- VMG8924-B10A and VMG8924- B30A Series
- User’s Guide
- Technical Reference
- Network Map and Status Screens
- Broadband
- Wireless
- Home Networking
- 7.1 Overview
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
- 7.4 The UPnP Screen
- 7.5 Installing UPnP in Windows Example
- 7.6 Using UPnP in Windows XP Example
- 7.7 The Additional Subnet Screen
- 7.8 The STB Vendor ID Screen
- 7.9 The 5th Ethernet Port Screen
- 7.10 The LAN VLAN Screen
- 7.11 The Wake on LAN Screen
- 7.12 Technical Reference
- Routing
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS Setup
- Interface Group
- USB Service
- Power Management
- Firewall
- MAC Filter
- Parental Control
- Scheduler Rule
- Certificates
- VPN
- Voice
- Log
- Traffic Status
- VoIP Status
- ARP Table
- Routing Table
- IGMP/MLD Status
- xDSL Statistics
- 3G Statistics
- User Account
- Remote Management
- TR-069 Client
- TR-064
- SNMP
- Time Settings
- E-mail Notification
- Logs Setting
- Firmware Upgrade
- Configuration
- Diagnostic
- Troubleshooting
- Customer Support
- Setting up Your Computer’s IP Address
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Wireless LANs
- IPv6
- Services
- Legal Information
- Index
VMG8924-B10A and VMG8924-B30A Series User’s Guide 275
CHAPTER 24
VoIP Status
24.1 The VoIP Status Screen
Click System Monitor > VoIP Status to open the following screen. You can view the VoIP
registration, current call status and phone numbers in this screen.
Figure 161 System Monitor > VoIP Status
The following table describes the fields in this screen.
Table 131 System Monitor > VoIP Status
LABEL DESCRIPTION
Poll Interval(s) Enter the number of seconds the Device needs to wait before updating this screen and then
click Set Interval. Click Stop to have the Device stop updating this screen.
SIP Status
Account This column displays each SIP account in the Device.
Registration This field displays the current registration status of the SIP account. You can change this in
the Status screen.
Registered - The SIP account is registered with a SIP server.
Not Registered - The last time the Device tried to register the SIP account with the SIP
server, the attempt failed. The Device automatically tries to register the SIP account when
you turn on the Device or when you activate it.
Inactive - The SIP account is not active. You can activate it in VoIP > SIP > SIP
Account.
Registration
Time
This field displays the last time the Device successfully registered the SIP account. The field
is blank if the Device has never successfully registered this account.
URI This field displays the account number and service domain of the SIP account. You can
change these in the VoIP > SIP screens.