User`s guide
Table Of Contents
- VMG8924-B10A and VMG8924- B30A Series
- User’s Guide
- Technical Reference
- Network Map and Status Screens
- Broadband
- Wireless
- Home Networking
- 7.1 Overview
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
- 7.4 The UPnP Screen
- 7.5 Installing UPnP in Windows Example
- 7.6 Using UPnP in Windows XP Example
- 7.7 The Additional Subnet Screen
- 7.8 The STB Vendor ID Screen
- 7.9 The 5th Ethernet Port Screen
- 7.10 The LAN VLAN Screen
- 7.11 The Wake on LAN Screen
- 7.12 Technical Reference
- Routing
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS Setup
- Interface Group
- USB Service
- Power Management
- Firewall
- MAC Filter
- Parental Control
- Scheduler Rule
- Certificates
- VPN
- Voice
- Log
- Traffic Status
- VoIP Status
- ARP Table
- Routing Table
- IGMP/MLD Status
- xDSL Statistics
- 3G Statistics
- User Account
- Remote Management
- TR-069 Client
- TR-064
- SNMP
- Time Settings
- E-mail Notification
- Logs Setting
- Firmware Upgrade
- Configuration
- Diagnostic
- Troubleshooting
- Customer Support
- Setting up Your Computer’s IP Address
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Wireless LANs
- IPv6
- Services
- Legal Information
- Index
Chapter 21 Voice
VMG8924-B10A and VMG8924-B30A Series User’s Guide
247
No Answer Call
Forward Enable
Enter the key combinations that you can enter to forward incoming calls to the phone
number you specified in the SIP > SIP Account screen if the calls are unanswered.
No Answer Call
Forward
Disable
Enter the key combinations that you can enter to turn the no answer call forward function
off.
Call Forward
When Busy
Enable
Enter the key combinations that you can enter to forward incoming calls to the phone
number you specified in the SIP > SIP Account screen if the phone port is busy.
Call Forward
When Busy
Disable
Enter the key combinations that you can enter to turn the busy forward function off.
One Shot Call
Waiting Enable
Enter the key combinations that you can enter to activate call waiting on the next calls.
One Shot Call
Waiting Disable
Enter the key combinations that you can enter to deactivate call waiting on the next call
only.
Do Not Disturb
Enable
Enter the key combinations that you can enter to set your phone not to ring when someone
calls you.
Do Not Disturb
Disable
Enter the key combinations that you can enter to turn this function off.
Call Completion
on Busy
Subscriber
(CCBS)
Deactivate
Enter the key combinations that you can enter to disable CCBS on a call.
Outgoing SIP
Enter the key combinations that you can enter to select the SIP account that you use to
make outgoing calls.
If you enter #12(by default)<SIP account index number>#<the phone number you want to
call>, #1201#12345678 for example, the Device uses the first SIP account to call
12345678.
Dial Plan
Dial Plan
Enable
Select this to activate the dial plan rules you specify in the text box provided. See Section
21.4.2 on page 248 for how to set up a rule.
Dialing Interval Selection
Dialing Interval
Selection
Enter the number of seconds the Device should wait after you stop dialing numbers before it
makes the phone call. The value depends on how quickly you dial phone numbers.
If you select Immediate Dial Enable, you can press the pound key (#) to tell the Device
to make the phone call immediately, regardless of this setting.
Immediate Dial Enable
Immediate Dial
Enable
Select this if you want to use the pound key (#) to tell the Device to make the phone call
immediately, instead of waiting the number of seconds you selected in the Dialing Interval
Selection field.
If you select this, dial the phone number, and then press the pound key.
The Device makes the call immediately, instead of waiting. You can still wait, if you want.
Apply
Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 113 VoIP > SIP > SIP Service Provider > Add new provider/Edit (continued)
LABEL DESCRIPTION