User`s guide
Table Of Contents
- VMG8924-B10A and VMG8924- B30A Series
- User’s Guide
- Technical Reference
- Network Map and Status Screens
- Broadband
- Wireless
- Home Networking
- 7.1 Overview
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
- 7.4 The UPnP Screen
- 7.5 Installing UPnP in Windows Example
- 7.6 Using UPnP in Windows XP Example
- 7.7 The Additional Subnet Screen
- 7.8 The STB Vendor ID Screen
- 7.9 The 5th Ethernet Port Screen
- 7.10 The LAN VLAN Screen
- 7.11 The Wake on LAN Screen
- 7.12 Technical Reference
- Routing
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS Setup
- Interface Group
- USB Service
- Power Management
- Firewall
- MAC Filter
- Parental Control
- Scheduler Rule
- Certificates
- VPN
- Voice
- Log
- Traffic Status
- VoIP Status
- ARP Table
- Routing Table
- IGMP/MLD Status
- xDSL Statistics
- 3G Statistics
- User Account
- Remote Management
- TR-069 Client
- TR-064
- SNMP
- Time Settings
- E-mail Notification
- Logs Setting
- Firmware Upgrade
- Configuration
- Diagnostic
- Troubleshooting
- Customer Support
- Setting up Your Computer’s IP Address
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Wireless LANs
- IPv6
- Services
- Legal Information
- Index
Chapter 21 Voice
VMG8924-B10A and VMG8924-B30A Series User’s Guide
243
Note: Click more to see all the fields in the screen. You don’t necessarily need to use all
these fields to set up your account. Click less to see and configure only the fields
needed for this feature.
Figure 145 VoIP > SIP > SIP Service Provider > Add new provider/Edit
Each field is described in the following table.
Table 113 VoIP > SIP > SIP Service Provider > Add new provider/Edit
LABEL DESCRIPTION
SIP Service Provider Selection
Service
Provider
Selection
Select the SIP service provider profile you want to use for the SIP account you configure in
this screen. If you change this field, the screen automatically refreshes.
General
SIP Service
Provider Name
Enter the name of your SIP service provider.
SIP Local Port Enter the Device’s listening port number, if your VoIP service provider gave you one.
Otherwise, keep the default value.