User`s guide
Table Of Contents
- VMG8924-B10A and VMG8924- B30A Series
- User’s Guide
- Technical Reference
- Network Map and Status Screens
- Broadband
- Wireless
- Home Networking
- 7.1 Overview
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
- 7.4 The UPnP Screen
- 7.5 Installing UPnP in Windows Example
- 7.6 Using UPnP in Windows XP Example
- 7.7 The Additional Subnet Screen
- 7.8 The STB Vendor ID Screen
- 7.9 The 5th Ethernet Port Screen
- 7.10 The LAN VLAN Screen
- 7.11 The Wake on LAN Screen
- 7.12 Technical Reference
- Routing
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS Setup
- Interface Group
- USB Service
- Power Management
- Firewall
- MAC Filter
- Parental Control
- Scheduler Rule
- Certificates
- VPN
- Voice
- Log
- Traffic Status
- VoIP Status
- ARP Table
- Routing Table
- IGMP/MLD Status
- xDSL Statistics
- 3G Statistics
- User Account
- Remote Management
- TR-069 Client
- TR-064
- SNMP
- Time Settings
- E-mail Notification
- Logs Setting
- Firmware Upgrade
- Configuration
- Diagnostic
- Troubleshooting
- Customer Support
- Setting up Your Computer’s IP Address
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Wireless LANs
- IPv6
- Services
- Legal Information
- Index
Chapter 21 Voice
VMG8924-B10A and VMG8924-B30A Series User’s Guide
237
call, you need to enable and configure a SIP account, and map it to a phone port. The SIP account
contains information that allows your Device to connect to your VoIP service provider.
See Section 21.3.1 on page 237 for how to map a SIP account to a phone port.
Use this screen to view SIP account information. You can also enable and disable each SIP account.
To access this screen, click VoIP > SIP > SIP Account.
Figure 142 VoIP > SIP > SIP Account
Each field is described in the following table.
21.3.1 The SIP Account Add/Edit Screen
Use this screen to configure a SIP account and map it to a phone port. To access this screen, click
the Add new account button or click the Edit icon of an entry in the VoIP > SIP > SIP Account
screen.
Table 110 VoIP > SIP > SIP Account
LABEL DESCRIPTION
Add new account Click this to configure a SIP account.
# This is the index number of the entry.
Active This shows whether the SIP account is activated or not.
A yellow bulb signifies that this SIP account is activated. A gray bulb signifies that this SIP
account is not activated.
SIP Account
This shows the name of the SIP account.
Service Provider This shows the name of the SIP service provider.
Account No. This shows the SIP number.
Modify Click the Edit icon to configure the SIP account.
Click the Delete icon to delete this SIP account from the Device.