User`s guide
Table Of Contents
- VMG8924-B10A and VMG8924- B30A Series
- User’s Guide
- Technical Reference
- Network Map and Status Screens
- Broadband
- Wireless
- Home Networking
- 7.1 Overview
- 7.2 The LAN Setup Screen
- 7.3 The Static DHCP Screen
- 7.4 The UPnP Screen
- 7.5 Installing UPnP in Windows Example
- 7.6 Using UPnP in Windows XP Example
- 7.7 The Additional Subnet Screen
- 7.8 The STB Vendor ID Screen
- 7.9 The 5th Ethernet Port Screen
- 7.10 The LAN VLAN Screen
- 7.11 The Wake on LAN Screen
- 7.12 Technical Reference
- Routing
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS Setup
- Interface Group
- USB Service
- Power Management
- Firewall
- MAC Filter
- Parental Control
- Scheduler Rule
- Certificates
- VPN
- Voice
- Log
- Traffic Status
- VoIP Status
- ARP Table
- Routing Table
- IGMP/MLD Status
- xDSL Statistics
- 3G Statistics
- User Account
- Remote Management
- TR-069 Client
- TR-064
- SNMP
- Time Settings
- E-mail Notification
- Logs Setting
- Firmware Upgrade
- Configuration
- Diagnostic
- Troubleshooting
- Customer Support
- Setting up Your Computer’s IP Address
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Wireless LANs
- IPv6
- Services
- Legal Information
- Index
Chapter 8 Routing
VMG8924-B10A and VMG8924-B30A Series User’s Guide
134
8.3 The DNS Route Screen
Use this screen to view and configure DNS routes on the Device. Click Network Setting >
Routing > DNS Route to open the following screen.
Figure 68 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
8.3.1 The DNS Route Add Screen
You can manually add the Device’s DNS route entry. Click Add new DNS Route in the Network
Setting > Routing > DNS Route screen. The screen shown next appears.
Figure 69 DNS Route Add
Table 41 Network Setting > Routing > DNS Route
LABEL DESCRIPTION
Add new DNS
Route
Click this to add a new DNS route.
# This is the index number of a DNS route.
Domain Name This is the host name or domain name of the DNS route entry.
Interface This is the WAN connection through which the Device forwards DNS requests for this domain
name.
Subnet Mask This is the subnet mask of the DNS route entry.
Modify Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.