Network Router User's Manual

P-661H-D Series Support Notes
Example
The following example shows how to dial to an ISP via the P-661H-D and then
establish a tunnel to a private network. There will be three items that you need
to set up for PPTP application, these are PPTP server (WinNT), PPTP client
(Win9x) and the P-661H-D.
(1) PPTP server setup (WinNT)
Add the VPN service from Control Panel ->Network
Add an user account for PPTP logged on user
Enable RAS port
Select the network protocols from RAS such as IPX, TCP/IP NetBEUI
Set the Internet gateway to P-661H-D
(2) PPTP client setup (Win9x)
Add one VPN connection from Dial-Up Networking by entering the
correct username & password and the IP address of the P-661H-D's
Internet IP address for logging to NT RAS server.
Set the Internet gateway to the router that is connecting to ISP
(3) P-661H-D setup
Before making a VPN connection from Win9x to WinNT server, you
need to connect P-661H-D router to your ISP first.
Enter the IP address of the PPTP server (WinNT server) and the
port number for PPTP as shown below:
49
All contents copyright © 2006 ZyXEL Communications Corporation.