Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
93 Chapter 10 Billing
10.3 Types of Subscriber Accounts
After you have set up the subscriber authentication methods and billing profile(s), you need to
create subscriber accounts. There are two types of subscriber accounts: static and dynamic.
• For static accounts, refer to Chapter 11 on page 94.
• For dynamic accounts, refer to Chapter 12 on page 104.
Spectrum MK II
Revenue Code Enter a revenue code (between 01 and 99).
Description Enter a description to identify the service. For example, Internet.
Marriott
Revenue Code Enter a revenue code (between 01 and 99).
Reference Enter a description to identify the service. For example, Internet.
Proprietary Select this option if you are using a proprietary PMS system.
Speed of PMS
Interface
Set the fields below to configure the PMS port settings on the VSG.
Note: Make sure the port settings are the same on the VSG and
the connected PMS device.
Bits per second Select the speed of the PMS port connection. The default is 9600.
Data bits Specify the data bits.
Parity Specify the parity.
Stop bits Specify the data stop bits.
Apply Click Apply to save the changes.
Table 21 System Setting: Billing: PMS Configuration (continued)
LABEL DESCRIPTION