Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide

Chapter 10 Billing 90

The following table descries the labels in this screen.

Table 20 System Settings: Billing: Billing Profile Setting

LABEL DESCRIPTION

No This read-only field displays the index number of the billing profile.

Name Enter a descriptive name for the billing profile for identification purposes.

Description Enter a description for this billing profile

Price

Duration Select a time period (minute, hour, day, week, month or Unlimited) and enter the

time unit in the field provided (not available for Unlimited).

Charge Specify the unit cost in this field.

Check Time Select Period Time Finish for time-to-finish billing method. Refer to Section 9.1.4

on page 81 for more information.

Select Expired when and specify the time from the drop-down list box(es) for the

accumulate billing method. The subscriber accounts will be invalid once the

allocated time period is used up. This option is only available when you select the

Day, Week or Month option in the Period Time field.

Selective

Unit

Specify the range of time units (between 1 and 99) a subscriber is allowed to

purchase at any one time.

The range is presented as a drop-down list box in the information pop-up window.

Bandwidth Limit

Note: You must activate bandwidth management to use this feature.

Refer to Chapter 16 on page 144.

Set the fields below to configure the bandwidth limit for this billing profile.

Uplink

Bandwidth

Limitation

To use a pre-defined option, select the first option and choose a bandwidth from the

drop-down list box.

To manually set the bandwidth, select the second option and specify the bandwidth