Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
67 Chapter 6 LAN and WAN Setup
Figure 24 System Settings: WAN/LAN: PPTP
The following table describes the related fields in this screen.
Table 9 System Settings: WAN/LAN: PPTP
FIELD DESCRIPTION
WAN Port Mode
PPTP Select this option to activate PPTP support. Refer to Section 6.5.4 on page 66
for more information.
PPTP Local IP Address Enter the IP address assigned to you.
PPTP Local Subnet
Mask
Enter the subnet mask assigned to you.
PPTP Local Default
Gateway
Enter the IP address of the gateway device.
Username Enter the user name exactly as your ISP assigned. If assigned a name in the
form user@domain where domain identifies a service name, then enter both
components exactly as given.
Password Enter the password associated with the user name above.
PPP MTU Setting Enter the size of a Maximum Transmission Unit (MTU).