Vantage Service Gateway User's Guide

VSG-1200 V2 User’s Guide
Chapter 4 Initial Setup Example 50
CHAPTER 4
Initial Setup Example
This chapter shows you how to configure the VSG for Internet access and user login.
4.1 Overview
As an Internet cafe owner, you want to set up the VSG in the store and provide Internet service
to customers. You have already signed up for Internet access from your local ISP and a DSL
modem is installed for Internet connection.
In-store Internet access is provided with a fee. You want to charge $5 per hour for Internet
access and allow customers to purchase up to 15 hours at a time. You create 10 customer
accounts and store them on the VSG which checks the account information before Internet
access is allowed.
Figure 18 Initial Setup: Network Example
The following outlines the configuration steps.
1 You should have already made the hardware connections and turned on the VSG. Refer
to Chapter 2 on page 38 for more information.
2 Configure the VSG for Internet access using the information provided by your ISP.
3 Create a billing profile that charges $5 per hour of Internet access.
4 Set the VSG to prompt for and checl customer account information.
5 Create customer accounts on the VSG.
6 Log in as a customer for connection test.
4.2 Configure the VSG for Internet Access
In this section, you set the VSG to receive a dynamic WAN IP address from the ISP since the
ISP does not provide you with a public IP address or Internet access account information.
LAN
WAN
Internet
Modem